祥鹄科技

Summary：Supramolecular interfacial engineering triggered electron delocalization for tailoring CNT dispersion was published in Composites Part B: Engineering (2026) and is indexed as a Xianghu Q1 application case for XH-200A / XH-200C. The source record connects it with CNT. Core operating conditions include Microwave curing program 100 W / 200 W / 300 W, 60 min. Key reported results include Tensile strength 94.8 MPa and Flexural strength 171.3 MPa.

Summary：A Ln-MOF Sensor Based on Dual-Signal Response and Logic Gating for the Ratio Fluorescence Detection was published in Luminescence (2026) and is indexed as a Xianghu Q1 application case for XH-100A. The structured source links this paper to MOF and DPA. The DOI recorded for this paper is 10.1002/bio.70493.

Summary：Microwave hydrothermal-assisted preparation of novel spinel-NiFe2O4/natural mineral composites as microwave catalysts for degradation of aquatic organic pollutants was published in Journal of hazardous materials (2018) and is indexed as a Xianghu Q1 application case for XH-100A. The structured source links this paper to environmental functional materials and microwave catalysis. Core operating conditions include Microwave power 750 W, Pressure 1.5 MPa, and Time 30.0 min. The DOI recorded for this paper is 10.1016/j.jhazmat.2018.02.014.

Summary：Enhanced oils and organic solvents absorption by polyurethane foams composites modified with MnO2 nanowires was published in Chemical Engineering Journal (2017) and is indexed as a Xianghu Q1 application case for XH-100A. The source record connects it with environmental functional materials. Core operating conditions include Temperature 85 °C / 80 °C, Power 700 W, Microwave power 700 W, and Time 60 min. Key reported results include Specific surface area 23.81 m2/g and Pore volume 0.1140 cm3/g.

Summary：A facile strategy toward 3D hydrophobic composite resin network decorated with biological ellipsoidal structure rapeseed flower carbon for enhanced oils and organic solvents selective absorption was published in Chemical Engineering Journal (2017) and is indexed as a Xianghu Q1 application case for XH-100A. The source record connects it with Research application. Core operating conditions include Temperature 600 °C / 80 °C, Microwave power 700 W, and Time 3 h. Key reported results include Specific surface area 379.98 m2/g and Carbon tetrachloride adsorption 2-fold.

Summary：Activation of peroxymonosulfate by microwave irradiation for degradation of organic contaminants was published in Chemical Engineering Journal (2017) and is indexed as a Xianghu Q1 application case for XH-100A. The structured source links this paper to PMS and from. Core operating conditions include Temperature 80 °C / 60 °C, Power 1000 W, and Microwave power 500 W. Key reported results include Removal 45.2%, Removal 0.8%, and Removal 12.1%. The DOI recorded for this paper is 10.1016/j.cej.2017.01.012.

Summary：Optimization of biodiesel production process from soybean oil using the sodium potassium tartrate doped zirconia catalyst under Microwave Chemical Reactor was published in Bioresource Technology (2013) and is indexed as a Xianghu Q1 application case for XH-100A. The source record connects it with green biodiesel production, microwave-enhanced transesterification, heterogeneous solid-base catalysis, and biomass energy conversion. Core operating conditions include Temperature 65°C / 600°C. Key reported results include Biodiesel yield 53.86%, Yield 94.75%, and Yield 85.25%.

Summary：A Large‐Sized Reduced Graphene Oxide with Low Charge‐Transfer Resistance as a High‐Performance Electrode for a Nonflammable High‐Temperature Stable was published in CHemsusChem (2018) and is indexed as a Xianghu Q1 application case for / and XH-200A / XH-200C. The structured source links this paper to graphene. Core operating conditions include Temperature 60 °C / 100 °C, Microwave power 999 W / 900 W, and Power 68.6 W. Key reported results include Energy density 22 Wh kg^-1, High energy density 68.6 Wh kg^-1, and Energy density 11.0 Wh kg^-1. The DOI recorded for this paper is 10.1002/cssc.201801968.

Summary：High-activity Fe3O4 nanozyme as signal amplifier: A simple, low-cost but efficient strategy for ultrasensitive photoelectrochemical immunoassay was published in Biosensors and Bioelectronics (2018) and is indexed as a Xianghu Q1 application case for XH-800S. The structured source links this paper to Fe3O4 and PSA. Core operating conditions include Time 30 min. Key reported results include Recovery 95.8%, Recovery 106.1%, and Particle size 30 nm. The DOI recorded for this paper is 10.1016/j.bios.2018.11.043.

Summary：Synthesis of Polyvinylpyrrolidone-Stabilized Nonstoichiometric SnO2 Nanosheets with Exposed {101} Facets and Sn(II) Self-Doping as Anode Materials for Li-Ion Batteries was published in Electrochimica Acta (2016) and is indexed as a Xianghu Q1 application case for XH-800S. The source record connects it with lithium-ion battery, microwave hydrothermal synthesis, and SnO2. Core operating conditions include Temperature 160 °C and Time 90 min. Key reported results include Capacitance 616 mA h g^-1 and Content 17 at.%.

Summary：The electrochemical Na intercalation/extraction mechanism of ultrathin cobalt(II) terephthalate-based MOF nanosheets revealed by synchrotron X-ray absorption spectroscopy was published in Energy Storage Materials (2018) and is indexed as a Xianghu Q1 application case for XH-8000 / XH-8000Plus. The structured source links this paper to MOF and sodium-ion battery anode. Core operating conditions include Time 8 h. Key reported results include Coulombic efficiency 100%, Capacitance 774 mA h g^-1, and Reversible capacity 555 mA h g^-1. The DOI recorded for this paper is 10.1016/j.ensm.2018.02.021.

Summary：Systhesizing SnTe nanocrystals leading to thermoelectric performance enhancement via an ultra-fast microwave hydrothermal method was published in Nano Energy (2016) and is indexed as a Xianghu Q1 application case for XH-8000 / XH-8000Plus. The source record connects it with microwave hydrothermal synthesis, thermoelectric materials, SnTe nanocrystals, and particle-size-effect control. Core operating conditions include Temperature 220 °C, Microwave power 550 W, Pressure 0.17 MPa / 4.0 MPa, and Time 20 min. Key reported results include Average particle size 165 nm, Average particle size 8.2 μm, Ultra-low thermal conductivity 0.60 W m^-1 K^-1, and Total thermal conductivity 0.60 W m^-1 K^-1.

Summary：Statistical modeling/optimization and process intensification of microwave-assisted acidified oil esterification was published in Energy Conversion and Management (2016) and is indexed as a Xianghu Q1 application case for XH-200A / XH-200C. The structured source links this paper to biodiesel production. Core operating conditions include Microwave power 328 W and Time 98.0 min / 98 min / 540 min. Key reported results include Conversion 78.0%, Conversion 78.57%, and Conversion 97.11%. The DOI recorded for this paper is 10.1016/j.enconman.2016.06.001.

Summary：Great-enhanced performance of Pt nanoparticles by the unique carbon quantum dot/reduced graphene oxide hybrid supports towards methanol electrochemical oxidation was published in Journal of Power Sources (2016) and is indexed as a Xianghu Q1 application case for XH-200A / XH-200C. The structured source links this paper to Pt and rapid microwave synthesis. Core operating conditions include Temperature 180 °C, Microwave power 700 W / 160 W, and Time 1.5 h / 30 min. Key reported results include Particle size 4.5 ± 0.6 nm. The DOI recorded for this paper is 10.1016/j.jpowsour.2015.10.092.

Summary：Preparation and structural characterization of poly-mannose synthesized by phosphoric acid catalyzation under microwave irradiation was published in Carbohydrate Polymers (2015) and is indexed as a Xianghu Q1 application case for XH-200A / XH-200C. The source record connects it with Research application. Core operating conditions include Temperature 115 °C, Microwave power 900 W, and Time 5 min. Key reported results include Yield 91.46%.

Summary：Effect of microwave-assisted curing on bamboo glue strength: Bonded by thermosetting phenolic resin was published in Construction and Building Materials (2014) and is indexed as a Xianghu Q1 application case for XH-200A / XH-200C. The source record connects it with Bamboo. Core operating conditions include Temperature 100°C / 110°C, Pressure 25 MPa, and Time 5 h / 12 h / 10 min. Key reported results include Microwave-cured sample shear strength 18.35 MPa, Microwave-cured sample shear strength 4-fold, Microwave-cured bamboo shear strength 18.35 MPa, and Shear strength of heat-cured sample 4.6 MPa.

Summary：This study compared conventional heating and microwave-assisted esterification of acidified waste cooking oil using a CERP/PES catalytic membrane. Under the optimized microwave conditions of 60 °C, methanol/acidified oil mass ratio 2.0:1, 3 g catalytic membrane annealed at 120 °C, 360 W microwave power, and 90 min reaction time, FFAs conversion reached 97.4%. The results show that microwave irradiation provides a rapid, simple, and greener route for biodiesel production from high-FFA waste oil feedstocks.

Summary： In order to address the dual challenges of environmental pollution and sustainable energy systems, this study investigates a novel COsequest technology through steel slag, a by-product of steel production. It introduces an ultrasonic-enhanced leaching process that uses CHCOOH to extract calcium and magnesium from steel slag, thereby facilitating the synthesis of CaCOwhiskers. The results showed that the selective leaching rate of Ca + Mg was significantly increased by increasing the ultrasonic power, improving solid-liquid consistency, increasing the initial reaction temperature, and using lower concentrations of CHCOOH. Kinetic analysis under ultrasonic conditions showed a low activation energy of 11.45 kJ•mol, indicating the presence of surface-controlled reaction kinetics during ultrasonic leaching. Eventually, high-purity CaCOwhiskers were synthesized under carefully controlled conditions: using 400 W of ultrasonic power, maintaining a reaction temperature of 70 C, and performing the procedure for 15 minutes with an initial solution pH of 9.2. This innovative approach not only helps to reduce CO2 emissions, but also promotes the reuse of steel slag, addresses environmental issues and supports a sustainable energy system. The report highlights the potential to integrate sustainable practices into the steel industry, in line with global efforts to mitigate climate change and reduce pollution.

Summary： The abundant resource of steel slag makes it an interesting prospect for long-term COstore through mineral carbonization . In this paper, the dissolution of steel slag in acetic acid (HAc) solution and the immobilization of COin in steel slag leachate are investigated to synthesize high-value CaCO. The results showed that the microwave water bath conditions were beneficial for increasing the leaching rate of Ca and Mg elements in steel slag, while the low concentration HAc solution showed high selectivity for Ca+Mg. In microwave-enhanced water bath reactions, the leaching rate and selectivity of Ca+Mg can be increased by increasing the reaction temperature, extending the leaching time, decreasing the concentration of the HAc solution, and increasing the stirring rate. The kinetic parameters of elemental calcium, including the apparent activation energy, were 14.51 kJ⋅mol, indicating control by surface chemical reactions. Finally, by introducing 20% CO into the leachate, high-purity CaCO whiskers could be synthesized at 400 W ultrasonic conditions at a reaction temperature of 70 °C, a reaction time of 15 minutes, and a solution pH of 9.1. This strategy promotes the parallel utilization of thin smoke gases and large quantities of solid steel slag waste, thereby improving the economic and environmental performance of the steel industry.

Summary：This research was completed by a researcher from the Key Laboratory of Comprehensive Utilization of Tailings Resources in Shaanxi Province. The paper discusses the preparation of active zinc oxide by leaching zinc oxide from ammonia, and published it in the important journal .